Wednesday, June 15, 2016

Accurate Description - Kawasaki Vulcan Cafe Racer



The Vulcan S ABS Café is Kawasaki's "learner approved" cruiser. It's styling is typical of all cruisers that follow in Harley's footsteps with its laid back riding position, wide handlebars and over inflated bodywork (in my humble opinion). However, at it's heart is an engine that uses the same configuration as some of the first motorcycles to ever be used for Cafe Racer conversions, a parallel twin. Granted the liquid cooled, Kawasaki 650 may not have the same aesthetic appeal as a pre-unit Bonneville, but to a romanticist the Vulcan engine is, in a roundabout way, a hommage to the legend. At least that's how Mário of MRS Oficina felt about it when he was given the opportunity to customise one himself.



The project began when Mário was approached by Kawasaki France to undertake a commissioned project in 2015. They had recently released the 'Vulcan S ABS Café' and wanted to see what Mário could make of it. Knowing that Kawasaki's claim to have been influenced by cafe racer styling when designing the Vulcan S was a bit of a stretch, he decided to follow their lead and build a bike worthy of the cafe racer moniker.



Despite being the lightest of the bunch in Kawasaki's cruiser range, the Vulcan S is no feather weight tipping the scales at a hefty 498 pounds (226kg). Mário was going to have to shed some serious pounds from the Kwaka if it was ever going to perform to his expectations. The weight reduction regime began by discarding the bikes fuel tank, seat and fenders. This was followed by the removal of the rear half of the frame, the cast wheels and any components that complimented the cruiser configuration such as the handlebars and forward control footpegs.



Stance was the next challenge to overcome. The Vulcan needed a less slouched, more aggressive posture if it was to have the geometry of a cafe racer. This required raising the rear significantly using a single, custom made shock absorber from Ohlins and modifying the swingarm to suit. The triple trees were then slid 20mm lower on the fork tubes and stiffer springs installed for optimum handling. A set of classically styled, laced rims with slick rubber donated by Pirelli were then bolted in place.


Mário wasted no time discarding the Vulcan's highly adjustable riding system, which Kawasaki had no doubt spent millions developing. In it's place he installed a single piece tank and tail that floats above the rear wheel and mounted the quintessential cafe racer control configuration of clip on bars and rear set footpegs. To continue to enhance the cafe styling the triangle headlight was also replaced with a yellow lensed Bates style unit, colour matched to the new bodywork and Ohlins shock reservoir. A slimmer custom front fender was also bolted in place for everyday riding practicality.



Reverse megaphone mufflers were the obvious choice for the exhaust system, mounting 2 of them using a custom made pair of stainless steel headers. Finishing touches were then mounted such as the cross stitched leather seat, the matching white faced Motogadget dials, Beringer brake reservoir assembly, Monza style filler cap and frame mounted, custom made indicators. 



Being a Kawasaki the obvious colour choice was always going to be green and Mário has smashed it out of the ballpark with a two toned, metallic scheme. Amazingly this entire build was packed into 4 short months leading up to the 2015 'Salon de la Moto Paris' where punters were lining up to place their deposits. Alas, much like Kawasaki Italy's 40th anniversary Z1000 from 2013, this bike will remain a one off, but here's hoping this won't be the last time we see the green team commission a build of this calibre.



Photography by Antoine Sayn

first read on returnofthecaferacers.com/



Sunday, June 12, 2016

Leather Clad Custom - Yamaha SR400 Cafe Racer


The Japanese custom motorcycle scene is arguably one of the most influential and progressive in the world. Japanese workshops like Cherry's Company, Brat Style, Custom Works Zon and Ritmo Sereno have inspired builders around the world and have even been commissioned by motorcycle manufacturers to modify their newest models. Unfortunately in the past it has been difficult to get in touch with Japan's home builders and enthusiasts, but all that's slowly changing thanks to social media.
I recently stumbled across the Instagram profile of Cyu-G and his Yamaha SR400 cafe racer. Despite a language barrier we managed to communicate enough to put together the following interview to share the story of how his cafe racer came to be...



ROTCR: Let's start by you telling us a bit about yourself and your history with bikes.

CYU-G: I live in Nagoya, Japan, I am 49 years old and have been riding for 33 years. Some of the bikes I have owned in the past are Kawasaki Z400FX, Suzuki RG250, Honda CT110 etc. When I customise them I usually get secondhand parts from auctions or shops and I build my bikes in my home garage when I have days off work.

I'm also into British vintage leather jackets and I repair and customise leather wear. In fact the blue Lewis Leathers I wear in these photos were originally a one piece race suit that I split to make a separate jacket. My skills are self taught with both leather and motorcycles.



What was the idea behind the build of this bike and how long did it take to complete?

As I collect and customise vintage leather wear I thought that a cafe racer styled motorcycle would suit these leathers. So I built this cafe racer using a 1994 Yamaha SR400. It took me about 2 years to custom like this and I did all myself apart from the silencers, which were modified by Motor Rock in Nagoya.



What custom work did you perform to transform the bike into a cafe racer?

I replaced almost everything, apart from the frame, engine and wheels. The fairing is a secondhand MINANI item, which I restored and mounted to the frame, using modified brackets from a different fairing. I also fabricated the mounting system for the instruments.

The long alloy petrol tank was hand formed from Aluminium and I made the petrol tank retaining strap using the buckle from a vintage British leather jacket as a fastener. The alloy seat was originally from an unfinished Harley Davidson project which I bought a while ago and customised by myself. The original subframe was shortened, and a new one constructed that also holds the tail light, indicators and fender.



The battery and electrical system are hidden under the alloy seat. The seat base was moulded from FPR and then upholstered by myself in real leather. I spent a lot of time designing my ideal cafe racer, and also in making the many brackets that hold it all together. A portion of the exhaust pipe was cut off and extended using a 20cm section of pipe, which is angled at 15 degrees to kick up the muffler.

I designed the bike more for style than outright performance. However, the engine was still mildly tuned thanks to a racing carburettor and the modified exhaust. The front drum brake was also changed to a disc brake setup, and the front and rear suspension were updated.



What do you like most about the finished bike?

The way the lines of the classic fairing and its rectangular headlight flow into the streamlined alloy petrol tank. I'm also really fond of the matching aluminium alloy petrol tank and seat, with my hand made leather seat upholstery. The Silver finish on everything looks great with leatherwear of any colour.

It's the perfect bike to combine my two passions.



Build sheet:

  • Faring:  MINAMI
  • Petrol Tank: Stinky
  • Alloy Seat: One off custom
  • Handlebars: TOMMASELLI
  • Front Brake:  320mm Disc, with Brembo 4 Piston Calliper & Nissin (Active) Master Cylinder
  • Rear Suspension:  OHLINS
  • Silencer:  Peyton Place (Customised by MOTOR ROCK)
  • Carburettor: Yoshimura FCR39 MJN
  • Fenders:  Peyton Place
  • Speedo and Tachometer:  DAYTONA


Photo by Keiichiro Netsuke 
Special thanks to Leather Girl HIROKO

Friday, June 10, 2016

Sacrilège: A Kawasaki Z1000ST Of Biblical Proportions


Ed Turner is one of Europe’s most extreme custom workshops. Owner Karl Renoult has a very clear and unapologetic vision: he builds each bike with “the sole purpose of giving it character and attitude.”This is Karl’s most outré creation yet, a Kawasaki Z1000ST heavy on biblical references and christened Ezechiel 21, ‘The Sword.’

The Z1000ST is interesting enough in its own right—35 years ago, it was Kawasaki’s first shaft-drive motorcycle, and pumped out a solid 93 horses. But it was also a little staid. And that’s like a red rag to a bull for Karl.The project was commissioned by Grégoire, a man counting his blessings after surviving the November 2015 attacks in Paris.

“He decided that his dreams had to be achieved in his lifetime,” says Karl. “After two or three phone calls, we had the outline of the project.”Grégoire wanted a machine with a powerful-looking frame, a springer front end, and beautiful finishes. The Z1000ST was chosen, largely for its powerful engine—this allowed Karl to devote most of the budget (“not crazy, but comfortable”) to the design.

The chassis took shape rapidly, with a sleeker profile at the back. But Karl resisted the temptation to mess too much with the stock wheels: “I find them pretty cool when polished and adapted to the CBR forks.”The Honda forks have been ‘emptied and springerized’ using custom dampers built by Shaft Racing. It’s a most unusual setup; the suspension duties have been moved from the fork springs to the shock nestling between the yokes.

“For this step, I admit I used some sketches—and even some math,” says Karl. “Not my habit!”“But as usual, surrounded by my mates Joe, Mikael and Gael, we tinkered with this thing and it works pretty well.”

Other cues come from the American vintage drag scene. Notably the proportions of the tires: an Avon 5.25/5.50 17-inch car tire at the rear, and a 3.25 18-inch Speedmaster Mk II rib tire at the front.Everything else is kept to the minimum—specifically, a tank that does not exceed five liters in capacity, and a microscopic brake light and flashers under the custom saddle, masterfully crafted by Red’s Leather.

“Restricted by the wallet, we were unable to satisfy all our pretensions for the preparation of the engine,” Karl says. “We had to play another card…”It was time for divine intervention, so Karl chose a few lines of Ezekiel 21 from the Old Testament to decorate the tank. “A rather creepy passage which speaks of a sword sharpened and polished—and a God who, for once, seems really pissed off and ready to fight.”

To complete The Sword, Karl called in extra manpower from the Breton artisans at Stick Your Cycles. They helped fabricated the bars and the stainless steel exhaust, and refinished the engine cases in green.After several months of work, the Kawasaki was finally ready to hit the autoroute.

Karl handed it over with a message to his client: “Greg, you run faster than bullets. Now let’s see what you can do behind the handlebars.”Amen to that.
Ed Turner | Facebook | Instagram | Photos by Francois Richer
Enigmatic French builder Ed Turner reworks the Kawasaki Z1000ST, with outrageous results.
Full Size

First read on bikeexif.com/

Wednesday, May 25, 2016

‘82 Yamaha XV920 – Hageman Motorcycles


GreenXV01
Written by Martin Hodgson.
In 100 years time when they write the history of the current custom motorcycle renaissance that we are living through you can be sure that Greg Hageman will be one of the leading names credited for spurring the revival. He can turn out a mean Harley, cafe a Honda and build just about any style of bike but it’s his incredible work with Yamaha Virago’s of the early ’80s that have really won him acclaim around the world; from magazine covers, to TV features and the trophies to match. But not only has Greg inspired a new generation of XV builders keen to tackle the old V-Twin he’s also produced a range of quality parts for his fellow customisers and without him leading the resurgence of the models popularity you have to wonder if the all new Yamaha “XV950” Bolt would ever have eventuated!

It was no surprise that when the Bolt was released and Yamaha arranged a build off between ten workshops that Greg took out the top prize with a vintage scrambler take on the all new XV. This latest build however is a little of the old and new, based on a 1982 Yamaha XV920 with a modern twist, the running gear is taken from a 1998 XV1100. “This bike was built for the perfect customer, someone who was more interested in performance, function and reliability than budget. He asked for a classic scrambler look that would mainly be ridden on road, but have the ability to occasionally stray off into the back pasture to check on his horses,” explains the main man from Hageman Motorcycles. Greg’s bikes are always picture perfect, like something you would expect to find on a new bike showroom floor, so the 82 frame might be thirty odd years old but you’d never know now that it’s had the Hageman treatment and is finished out in all black.
GreenXV05
The standard subframe is gone and bolted to the back is one of Hageman’s own straight from his parts catalogue, these have become a must have item for so many Virago builders and while many have tried to imitate there is nothing like the real thing! With the customer wanting the option of taking short rides two up the subframe was modified to accept this seat that provides plenty of comfort and practicality without taking anything at all away from the looks. If Greg’s subframes provide part of the all-important skeleton of a world-class Virago build his fabrication skills have also stood the test of time making beautiful Benelli tanks fit perfectly on the Yamaha frame. This bike is no different with the classic tank getting a pair of Yamaha badges and a flip style fuel filler. “As you can probably tell we were really going for a British look, the owner had the tank painted by Moecolors of Tampa to match an old MG he was rather fond of.”
GreenXV02
To let the paint work really stand out the front and rear fenders are not only exceptionally practical but have been polish to a brilliant shine. The addition of racing side covers is another Hageman signature that gives you more than a subtle hint of the inspiration of this classic Scrambler. With the Green Machine now looking a treat it was over to functionality as Greg’s bikes are built to ride and the suspension has come in for a thorough overhaul. The stock forks are swapped out for a late-model HD entire 39mm front end. Not stopping there the forks have been rebuilt with improved springs and preload adjusters. Out back the unique in frame mono-shock has been swapped out for a Hagon unit that also features a remote adjuster. Arresting forward momentum is done courtesy of a single drilled disc rotor up front and the beefy Yamaha drum at the rear.
GreenXV11
But getting that momentum well and truly underway is the very clever engine swap that Hageman has performed mating the ’82 XV frame with the newer and bigger capacity ’98 engine. Before the big block 1063cc engine was fitted into place Greg treated it to polished stainless fasteners and a thorough detail. With just 2,000miles on the clock it was in brilliant condition and the far superior ignition and starting system leads to a classic bike with modern reliability. The standard carbies have been ditched for Mikuni VM items that add even more torque and top end performance. Given the owner wanted the ability to go off-road to check on his horses Greg had to come up with an exhaust system that looked good, was performance orientated but didn’t put a fright up the ponies. “The exhaust is something I made using Cone Engineering “Quiet core” mufflers, making the secondary baffles removable. It’s a two into one, into two system.”
GreenXV10

With the major components taken care of Greg spent a good deal of time piecing together all the little parts of a motorcycle that turn a custom into a truly functional machine you can ride daily. “I added a Motogadget M-unit, Motogadget bar end turn signals for the electrics. The Speedo is Acewell, I like the simplicity of using and installing this speedo.” The flat track bars keep the look spot on and with just the small Motogadget switches, master cylinder and a single mirror result in an extremely clean look that is still utterly practical. The headlight gets protection from a mesh stone guard while an old school taillight sits out the back on the rear fender. There is passenger fold up foot pegs for the pillion and Greg put in special effort on the riders peg placement, as the customer is 6’4″ and wanted a comfortable ride that was still sporty in nature.
GreenXV14
Finishing up the build are the excel alloy rims with stainless spokes that have been laced to the standard hubs. Rubber comes courtesy of Kenda dual sports “less aggressive since it’ll spend the majority of time on the pavement.” Which is yet another reason a Hageman build is such a work of art; they look good enough to enter any show and take home the trophies, yet never compromise on being a useable motorcycle. “The bike runs, rides and handles very well, mission accomplished.
GreenXV18
The bike is most of all, very fun to ride, comfortable and dependable unlike so many customs on the market I see being built today. I like to emphasize both functionality as well as the cosmetic look.” Greg’s longevity and success is simply a commitment to delivering in every area a motorcycle should, with no corners cut and an end product straight from the top shelf!

GreenXV07
  First read on www.pipeburn.com

Sunday, May 15, 2016

South Garage - Kimera Sportster Cafe Racer


It's been some time since I featured a custom build from Italy's South Garage. That doesn't mean that Enzo and the boys have been sitting around twiddling their thumbs though. Their website currently showcases over 30 original South Garage custom builds that are enough to make any motorcycle lover weak in the knees. Although European and British made motorcycles tend to be their preferred subject matter, South Garage have ventured into relatively new waters with their latest Harley Davidson based build.


The South Garage 'Kimera' started out life as a 2006 Harley Davidson 1200cc Sportster. Never the one to turn down a challenge the South Garage team set their sights on converting the Harley cruiser into a cafe racer styled ride. This of course meant dealing with the inherent Harley Davidson design features that make this type of transformation a problematic one. 


Levelling out the Sportster's hunched frame and squat rear end was the most challenging task to overcome. For this an entirely new front and rear suspension system was chosen from the Öhlins catalogue. At the pointy end there's a set of custom mounted gold anodised forks, held in place by a one off CNC alloy top clamp and rolling on a downsized front rim. At the back a pair of tall piggy back shocks mounted to a lightweight, alloy swingarm lift up the rear to level out the backbone of the frame. 


The bikes one of a kind tank and tail have been hand formed from aluminium. The custom, narrow fuel tank sits low on the frame and features an offset filler with Monza styled cap giving it a unique, asymmetrical aesthetic. The tanks belly has also been shaped to follow the curve of the engines v-twin heads to maximise capacity. The tail uses a classic cafe style hump with an inset brake light and top ridge that mimics the lines of the tank. 


The bikes revised riding position utilises CNC machined rear set foot pegs and a custom made pair of low slung handlebars. The new bars create a similar appearance to clip ons without sacrificing rider comfort and have been finished off with custom levers and Biltwell grips. Instrumentation has been reduced to a single MotoGadget Chrono Classic Speedo and the small Sportster headlight was replaced by a Lucas 5" headlamp.


To further improve upon the Harley's handling there's a full Brembo brake package and not satisfied with the 1200cc v-twin's factory performance figures, South Garage have squeezed some additional grunt out the engine by adding a full titanium exhaust system, free flowing air filter and custom fuel map. 


One thing South Garage never fail to deliver on is a great looking paint scheme and Kimera is the perfect example. The combination they've selected uses a striking trio of brushed and clear coated alloy, Ox blood paint and gold pin striping that ties all of the other elements of the bike together beautifully.

Harley's often cop a bit of flak in cafe racer circles and the comments these kind of builds get on my Return of the Cafe Racers social pages tend to follow suit. This time though I think Kimera could leave the neysayers lost for words.

Nate's Burly CB - PopBang Honda Cafe Racer



This little Honda CB400F ended up with me after an impulse buy at the Mudgeeraba swap meet in Queensland. After a bit of haggling, I handed over $350 and it was mine. It was reasonably stock other that a rattle can paint job on the tank with bashed in knee wells. The motor had been pulled out and the top end lifted off, but it was all there. I got it back to my workshop, basically stuck it up on the mezzanine and forgot about it. It wasn't until a couple of big burly looking fellas came in wanting me to build a couple of bikes for them and asked what I had. All I had was a CX500 in a million pieces and this 1974 CB400f project. They argued over who would get which one and the one that ended up choosing the CB was none other than NRL superstar and just general legend Nate Myles.




Obviously Honda's little 400 four isn't the biggest bike around. So the plan was to make it larger while retaining its original proportions. The rear of the frame was cut off at the back bone and swing arm mounts and a raised floating seat section with mono shock mount was fabbed up to replace it. The swing arm was extended 50mm, bracing for the mono shock was welded in and the shock from a late model Triumph holds it all together. I then found a really nice Ducati Monster front end that had the perfect dimensions for this project. The neck of the frame had to be dropped about 20mm lower so the Ducati top clamp could sit closer to the bikes tank.



The bikes tank and tail are modified versions of a fibreglass Cafe Racer kit I make for the CB400f with a 3" longer tank. On this one I added knee wells, scallops to accommodate the Ducati triple trees, a flush mounted pop up cap and I separated the seat from the tail section. Carbon fibre strips were also added down the back bone of the tank and tail for additional strength and aesthetics. Once it was all mocked up with a set of clip-on handlebars the bike was looking much more aggressive.

Nate came in to try it out for size. I have to admit, I was a little scared it was still going to be too small, especially when he stood next to it. But once he sat in the saddle it fit him like a glove. I then had to think about moving this bulk of a man along at a reasonable pace.



The motor was fully rebuilt with a Yoshimura style big bore kit, Dyna ignition, freshly rebuilt carbs wearing K&N filters and lots of new internal parts. I made the custom exhaust out of stainless steel including the mufflers. Each side is made out of 22 pieces welded together. They give the bike a mean super bike sound, but it doesn't pierce your ear drums. You could say it sounds a lot bigger than what it is.

To keep it sticking to the road a 17" x 5" rim was polished up and laced to the original rear hub. The front wheel however, was a little more complex, and soon became my favourite part of the bike. It's a CBX550 twin ventilated inboard disc brake hub. It took me forever to find it. It had to come out of England and it was a mess. I completely rebuilt it and smoothed the outer plates of any unwanted excess. As these hubs were originally mounted to an ugly ComStar style rim I had to CAD design the two rings that bolt onto the hub to adapt it to spokes. I had it water jet cut, machined the taper and countersunk all the holes. It was then laced to an Excell 18" x 3.5" rim with stainless spokes. Both rims were wrapped in Pirelli Angel GT rubber



Then it was time to add all the fancy bits. It's running a 4" GPS speedo/tacho custom made by SpeedHut in the states . It was sunk into the 7" headlight that's mounted using custom stainless brackets and wrapped with a one off stainless grill. It also has customised hydraulic brake and clutch masters with hidden reservoirs. Flush mount handle bar switches, CAD designed, one off foot controls, custom polished linkages, stainless steel etched logo on the points cover, keyless ignition system, custom made tail lights, custom made seat trimmed by Hotel & Club Decor in Burleigh, hidden AntiGravity Battery, wiring run through the frame and electrics hidden under the seat in a custom flush mount box.



I was given strict orders that the bike had to be maroon, so I found a deep burgundy to keep it classic,  adding in a little modern flare with layered graphics on the side including Nate's state of origin number and the iconic Honda wings. The real carbon fibre on top was outlined in an off white and cleared over. The motor, brake plates and master cylinders where all painted a custom mix of pewter and satin cleared to mix it up a bit. The frame was totally smoothed over and freshly coated in gloss 2 pack black.

At the beginning of the build I had convinced Nate we'd end up with a 70's styled street fighter, and I think that's what he got. It was a huge project and I want to thank Nate for putting up with how long it took me to finish! Hopefully there's another project between us  down the track!

First read on www.returnofthecaferacers

Story by Justin Holmes
POP BANG CLASSICS

Photography  by Kenny Smith



Sunday, April 24, 2016

Ardent Featherbed - Harley Sportster Cafe Racer


As any artist will tell you, composition is everything. Over his 30 year career as an artist Curtis Miller has fashioned custom furniture, worked as an animator and had his paintings and photographs sold in galleries. Now at 59 years young he's begun applying his skills to custom motorcycle building and as you would expect they are bona fide works of art, but in terms of composition, it's how his bikes are put together that really makes them special...




"As an artist, I love beautiful things. I also love making things. When I get passionate about something, it's only a matter of time before I want to start making them. I've built classical and electric guitars, a wooden kayak and many radio controlled gliders. Now I make motorcycles.

My history with motorcycles is actually quite short. I only started riding four years ago, at the advanced age of 55. I started on a Harley Sportster and moved up to a Softail Slim so I could travel longer distances with my partner. Within a year I had started customizing my bikes. The following year I started my first full custom build and since then I've been building full time. I had absolutely no mechanical background when I started out. I knew how to use tools of course, but hadn't even performed an oil change on a motorcycle before."


"I started teaching myself how to work metal and weld, how to use an English wheel and a mallet and shot bag. Before long, I got to the point where I needed help and advice. I found an excellent motorcycle program at a local Community College. The first course I did taught me the mechanics of motorcycles. I then took welding, machining and metal shaping classes and I'm now a certified mechanic and I'm still taking advanced classes in engine building, Dyno operations and tuning.

My first build was a classic chopper with a raked springer front end and a hard tail. You have to remember that I came from the Harley-Davidson world. It was awful to ride. Harsh on the backside and almost unmanageable at the front end. When I finished and rode the thing, I decided right away that the next motorcycle I built would be something with real, working suspension that handled well. I loved the clean, compact, elegant lines of Cafe Racer styled bikes so that's where I started. I decided to build a modified featherbed style frame and built everything around a 2009 Sportster engine I bought from Ebay."


"I built the bike entirely by myself and it took me a full six months to complete. I used no outside services other than getting the logos 3D printed. When I bent and welded the frame on my jig I carefully checked the rake and trail to make sure the handling would be correct. I made the engine mounts and I fabricated all of the aluminium bodywork by hand then welded, sanded and polished them. I built the electrical box from aluminium sheet and even welded up the swingarm from flat stock. I painted the frame and electrical box (under the seat) and even masked off the graphics. I also wired the bike, starting with a Sportster wiring harness, cutting it to pieces and reassembling it. I made the gas and oil caps, the timing cover, the rearsets, everything. Although I suppose I need to also mention my neighbour Jeff, who sometimes came over and held something while I tack welded it!"



"Even the caps for the brake reservoirs were hand made, as were the bar end fittings and the cap for the steering neck. I've since replaced the plastic reservoirs with commercially made ones that were cleaner and more compact. I even made the license plate holder, though the one in these pictures has been replaced with a more compact, simpler and stronger one.

Commercially purchased parts included the engine, a complete CBR1000rr front end and rear shocks, the wheels, the brake rotors and tires. The headlight is from Dime City Cycles and I used LED lighting for the turn signals and the tail light."



"I'm most proud of the way the overall build hangs together. I think it works as well as it does because of its proportions. The way the electrical box fits under the seat, the size and shape of the gas and oil tanks, the rough and ready looking swingarm and exhaust pipes. Best of all it rides and handles great.

Due to the incredible reaction I got from people when I rolled this bike out of my workshop I decided to start building bikes commercially. To help fund Ardent Motorcycles next build my featherbed Sportster is for sale."

If owning a work of art that actually rides interests, you can reach Curtis by clicking the link below...